High Performance Mains Filter Circuit - DAP2 EMI Filter with On-board Type rated current—1A-10A – Mengsheng

Short Description:

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Diy Alternator Noise Filter, Blue Ac Filter, Diy Alternator Noise Filter, Welcome to make contact with us if you're fascinated inside our product, we are going to provide you with a surprice for Qulity and Value.

High Performance Mains Filter Circuit - DAP2 EMI Filter with On-board Type rated current—1A-10A – Mengsheng Detail:

Product introduction

DAP2 series of products produced by our company are characterized by pin interface design, convenient circuit board installation, small size, low price, and good performance in solving the high frequency interference of 100Khz-30mhz.
DAP2 Series EMI power line noise filter is made of high-quality manganese-zinc ferrite magnetic rings and capacitors, and has first-class process quality and good performance. pin interface design ,material parameters can be customized. And it is an emi filter with good suppression of common mode and differential mode interference. This product is simple in design, but has better performance, convenient connection, convenient use and low price. DAP2 Series EMI power line noise filter is very popular overseas market, and many customers all over the world contact us for bulk purchase. Our products are of high quality and affordable. We are also a professional manufacturer in China. Our MOQ is not high. If you need samples, you can contact us first. We will provide samples for you to check the quality.

Application cases

They have been widely used in a variety of complex electromagnetic interference environment equipment, such as household appliances, test equipment, medical equipment, fire protection electrical system, urban security monitoring system, stage lighting equipment, power grid control system, LED lighting drive system, industrial automation robot, etc., so as to ensure the normal and safe operation of these equipment and effectively reduce the failure rate of equipment, Reduce the interference of high frequency signal to peripheral equipment and power grid, and escort your EMC conducted radiation test.

Rated voltage	115/250VAC
Line Frequency	50/60Hz
Test Voltage	1500VDC (line/line)
	2150VAC (line/ground)
Insulation Resistance	>50MΩ@500VDC
Climatic category	25/085/21

List of general products

Part No.	Rated Current	Leakage Current	Dimension	Electrical Schematics	Safety certification	Remark
DAI2-1A	1A	<0.8mA	P2		CUL, CE CQC, ROHS	Parameters support customization
DAI2-3A	3A	<0.8mA	P2
DAI2-6A	6A	<0.8mA	P2
DAI2-10A	10A	<0.8mA	P2

Outine Drawing and Dinemsions(mm)

Insertion Loss

DAP2-1A

DAP2-6A

DAP2-10A

DAP2-3A

Product detail pictures:

Related Product Guide:

We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for High Performance Mains Filter Circuit - DAP2 EMI Filter with On-board Type rated current—1A-10A – Mengsheng, The product will supply to all over the world, such as: Roman, Venezuela, Honduras, We will supply much better products with diversified designs and professional services. We sincerely welcome friends from over the world to visit our company and cooperate with us on the basis of long-term and mutual benefits.

Ac Mains Filter